Alphasonik APP122 Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Subwoofer Alphasonik APP122. Alphasonik APP122 16 halaman.

Controls And Functions

1. Speaker Terminals

These chrome plated connectors can accept wire gauges from 16 - 8 gauge. Be careful to

observe proper polarity when connecting the cables.

2. B - Terminal (Chassis ground)

To avoid unwanted ignition noise caused by ground loops, it is essential that the amplifier

be grounded to a clean bare metal surface of the vehicles chassis.

NOTE: GROUND WIRE SHOULD NOT BE EXTENDED MORE THAN 3FT. (1 METER)

3. Remote Turn-On Input

This lead goes to the power antenna output of the car stereo, (Some Car Stereo's have a

dedicated remote output) This amplifier is turned "ON" remotely when the vehicle's stereo

is turned "ON".

NOTE: IF YOUR RADIO DOES NOT HAVE +12 VOLT OUTPUT LEAD WHEN THE RADIO IS TURNED ON,

THE "REMOTE" TERMINAL ON THE AMPLIFIER CAN BE CONNECTED TO THE VEHICLE'S ACCESSORY

CIRCUIT THAT IS LIVE WHEN THE KEY (IGNITION) IS "ON".

4. B+ Terminal (Battery Positive)

Due to the power requirements of the amplifier, this connection should be made directly to

the positive (+) terminal of the battery. For safety purposes, install an in-line fuse holder as

close to the battery positive (+) terminal as possible with an ampere rating not to exceed

the total value of fuses in the amplifier.

SPEAKER

POWER

GND

REM

BAT T

POWER

GND

REM

BAT T

POWER

GND

REM

BAT T