ABB ControlMaster CM10 Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Pengontrol ABB ControlMaster CM10. ABB ControlMaster CM10 4 halaman.

Instruction IN/RandC/003–EN Rev.A

ControlMaster controllers and indicators

ConfigPilot

Creating, uploading and downloading configurations

Measurement made easy

1 Introduction

A configuration for a ControlMaster (both controller and

indicator) can be created, modified and backed up to a

PC using the ConfigPilot software program.

ConfigPilot is a utility used in conjunction with a USB

IrDA adaptor and can be downloaded from:

www.abb.com/recorders.

2 Items required

2.1 ConfigPilot kit

Description

USB IrDA adaptor

This publication

Table 2.1 ConfigPilot kit CM30/0715

Part no.

B12895

IN/RandC/003-EN

3 Firmware revision

The following instrument firmware revisions are compatible with

ConfigPilot:

Instrument

Firmware revision

CM15|P2|00|02|22

CM15

CM15|P2|01|02|22

CM10|P2|00|02|22

CM10

CM10|P2|01|02|22

CM30

CM30|P2|00|02|22

CM50

CM50|P2|00|02|22

CMF160

CMF160|P2|00|02|22

CMF310

CMF310|P2|00|02|22

Table 3.1 Instrument firmware revisions

IMPORTANT (NOTE) If using an earlier firmware

revision, contact your local ABB representative for more

information.

or later