Axxent AX2300i Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Axxent AX2300i. Axxent AX2300i 5 halaman. Professional amplifiers

user manual

models AX2150S • AX2300i • AX2500i

Controls and connectors on the rear side

When looking at the rear of the models AX2300i and AX2500i you

immediately may note the vertical slits. Behind those the heat sinks

are located which must be kept free at any time in order to let the

cooling air stream front to rear flow without restrictions. On the

model AX2150S you will note a grid covering the cooling fan. This

grid also must be kept free any time to let the air stream flow freely

and unhindered. With all three models the fan rotation is kept to a

minimum to always ensure very low noise in operational mode, es-

pecially when used in calm surroundings.

The mains switch on the models AX2300i and AX2500i is located

centrally and on the left side on model AX2150S. Close by you will

find the IEC-mains plug with the fuse holder. Model AX2150S uses a

4 A fuse, while in the model AX2300i is equipped with a 6,3 A and

the model AX2500i with a 10 A fuse. All fuses are 5 x 20 mm long,

with slow blow characteristic. When the on/off LED indicator is not

lit, a faulty fuse may be the reason. In this case please have the fuse

changed by qualified personnel. In case the fuse is blown again,

please contact your dealer, a qualified service workshop or ship the

unit to the manufacturer axxent e.K.

Next to the mains plug and switch (models AX2300i & AX2500i)

you will find the insulated output contacts. On model AX2150S you

will see the red/black touch proof binding posts. The polarity of the

posts is marked + and –. In addition with model AX2150S you will

find the marks for mono bridge mode operation: bridge output + is

the red pole for output 1 and – the black pole for output 2. Please

note that on all loudspeaker outputs a high and dangerous voltage

may be present – that's why you will see the warning sign for haz-

ardous shocks.

On the next page you will find the information and instructions for

the in- and output connectors.

axxent e.K. • Technologiezentrum Herzbachtal • Zum Wartturm 15 • 63571 Gelnhausen

Fon: +49-6051-9165584 • Fax: +49-6051-9165585 • [email protected] • www.axxent.de