ARCBRO Spark Series Panduan Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemotong ARCBRO Spark Series. ARCBRO Spark Series 4 halaman. Cnc plate cutting machine

Service Support Spirit

Basic logic: Follow the Number of each Parts to install.(from0-12)

Step1:Use 4 M8 bolts to fix(3)Triangle support 、 (0)Base 、 (1)shorter Square tube and (2)longer

Square tube.

(Pay attention to distinguish which leg and the length of 2 Square tubes)

Step2:Use M8 bolts to fix the (0)Base 、other Square tubes\Triangle supports and（10）Horizontal

axle.

(Install according to the numbers and in counterclockwise)

Step3:From buttom,Use 24 M4 Stainless Bolts to fix (12)the Workpiece table sealing board and the

base as shown in the figure below.(fixed with 24 M4 Stainless Bolts)

Step4:Rotate Horizontal axle to be perpendicular to the main Axle,then fix with 4 M6 Hexagon socket

screws.

WWW.ARCBRO.COM

Unique Solution