Epson ActionTower 3000 Computer Baca Panduan Pertama Ini - Halaman 25

Jelajahi secara online atau unduh pdf Baca Panduan Pertama Ini untuk Printer Epson ActionTower 3000 Computer. Epson ActionTower 3000 Computer 29 halaman. Product information guide
Juga untuk Epson ActionTower 3000 Computer: Panduan Pengguna (34 halaman), Panduan Pengguna (38 halaman), Penggantian Kartrid (2 halaman), Panduan Informasi Produk (11 halaman), Panduan Pengaturan Cepat (4 halaman)

So you rebooted your system using

And the system did not load your sound card or

CD-ROM drivers.

If so, reset the computer by turning it off, waiting 20 seconds,

and turning it back on again. This should resynchronize the

sound card. If your computer still has trouble recognizing a

program after you run a memory-intensive one, do not

press

wait 20 seconds, and turn it back on again.

If your system locks up when it attempts to load your

sound card or CD-ROM drivers and will not completely

boot, your sound card or CD-ROM drive may be defective.

In order to continue using your system while you

investigate the problem, follow these steps:

Turn off the system.

Insert a bootable diskette and turn on your system

After it boots, log onto the root directory of your hard

disk.

Edit the AUTOEXEC.BAT and CONFIG.SYS files (as

described in step 1 on page 19) and add

to the beginning of any command lines that affect your

sound card and CD-ROM drive. (Or restore your

original system files as described in the next section.)

Remove the bootable diskette

Reboot your computer from the hard disk drive.

Contact your Authorized EPSON Customer Care Center or

the EPSON Connection to report the problem with your

sound card or CD-ROM drive; see page 6 for instructions.

Read This First

Ctrl Alt Del

to reboot it; instead, turn off your system,

Ctrl Alt Del

(remark)

REM