Accurion Halcyonics Vario Basic Series Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Laboratorium Accurion Halcyonics Vario Basic Series. Accurion Halcyonics Vario Basic Series 16 halaman.
Halaman Cetak4. Safety Instructions and Warnings
Please read through the following safety instructions and warnings carefully before using this equipment.
General Warnings
Do not operate the system in a potentially explosive or humid environment. Do not switch on the system
if there is any visible damage or if you think it might be damaged. In this case, turn off the power immedi-
ately and notify our distributor in your area or contact Accurion's headquarters in Germany directly.
Electrical Safety
This system may be operated only on AC grounded power. Do not interrupt the protective grounding
conductor under any circumstances. If you plan to use a power cable other than the standard power cord
supplied with this equipment, first check that the protective grounding conductor is connected.
Before starting to operate this equipment, check the voltage rating to be sure that it matches your local
voltage. For further information, please refer to the specifications on page 10.
Finish the set up and installation before attempting to plug it into an electrical outlet. Never open the
equipment housing. Only authorized and qualified personnel may service or repair the equipment.
The device must be connected to an easily accessible supply socket so that in the event of a malfunc-
tion, the supply plug can be removed quickly.
Mechanical Safety
Be sure that the equipment rests on a stable surface that can safely support the weight of this
instrument.
Please note that you need to lock the system before you transport or move the equipment! For
further instructions, please refer to the section on "Static Load Adjustment and Transportation
Lock" on page 6.
Intended Use
The system is suited to isolate various measurement equipment from building vibration and other distur-
bing influences. Every other use is not permitted.
Never use the isolation system in mobile environments or outside the specified environmental
and operational requirements, see page 9.
DIN and European Standards, European Council Directives
Halcyonics Vario Basic systems conform to the requirements currently valid for electrical safety accord-
ing to EC Directive 2014/35/EU and for electromagnetic compatibility according to EC Directive 2014/30/
EU. This equipment has been tested and found to comply with the following standards EN 61010-
1:2010.
- 5 -