Cisco AJ732A - MDS 9134 Fabric Switch Catatan Rilis - Halaman 18

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 44 halaman. Converged network switches for nx-os 4.0(1a)n1(1)
Juga untuk Cisco AJ732A - MDS 9134 Fabric Switch: Panduan Konfigurasi (49 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (26 halaman), Catatan Rilis (22 halaman), Panduan Referensi Cepat (14 halaman), Catatan Rilis (3 halaman)

Halaman Cetak

Cisco AJ732A - MDS 9134 Fabric Switch Catatan Rilis

Upgrading Your Cisco MDS SAN-OS Software Image

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Note

Check the syslogs for any ISL that was isolated.

Step 3

2005 Aug 31 21:52:04 switch %FCDOMAIN-2-EPORT_ISOLATED:

%$VSAN 2005%$ Isolation of interface

port-channel 52 (reason: unknown failure)

2005 Aug 31 21:52:04 switch %FCDOMAIN-2-EPORT_ISOLATED: %$VSAN 2005%$

Isolation of interface port-channel 51

(reason: domain ID assignment failure)

Issue the following commands for the isolated switches in Step 3:

Step 4

switch(config)# vsan database

switch(config-vsan-db)# vsan vsan-id suspend

switch(config-vsan-db)# no vsan vsan-id suspend

Step 5

Issue the ivr refresh command to perform an IVR refresh on all the IVR enabled switches.

Step 6

Issue the copy running-config startup-config command to save the RDI mode in the startup

configuration on all of the switches.

Step 7

Follow the normal upgrade guidelines for Release 2.1(2b). If you are adding new switches running Cisco

MDS SAN-OS Release 2.1(2b) or later, upgrade all of your existing switches to Cisco SAN-OS Release

2.1(2b) as described in this workaround. Then follow the normal upgrade guidelines for Release 3.3(3).

Note

Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(3)

Complete Step 2 for all IVR enabled switches before moving to Step 3.

RDI mode should not be disabled for VSANs running in interop mode 2 or interop mode 3.

OL-14116-11