Cisco ASR 920 series Panduan Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Cisco ASR 920 series. Cisco ASR 920 series 36 halaman. Aggregation services router
Juga untuk Cisco ASR 920 series: Memulai (6 halaman), Panduan Instalasi (42 halaman), Panduan Pemasangan Perangkat Keras (46 halaman), Manual (36 halaman)
Halaman Cetak
Installing the DC Power Supply
Installing the DC Power Supply
When installing DC power supply, use 14 AWG, 90°C wires. Always ensure that the building's
Note
installation for short-circuit (overcurrent) protection does not exceed 15A.
The DC connector or terminal block has an inbuilt screw and cage nut to which a torque of 1.3 to 1.8
Note
N-m can be applied.
Figure 3-13
A
B
To attach the DC power supplies:
Step 1
Open the DC power supply guard.
Step 2
Attach the DC supply wires in the designated screws. See
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
3-14
DC Connector With Inbuilt Screw
M
C
A
0.97 inches
0.31 inches
Chapter 3
B
C
0.27 inches
M
0.81 inches
Figure
Installing the Cisco ASR 920 Series Router
3-14.
OL-32751-01