Sharp CD-DP900H Panduan Pengoperasian - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-DP900H. Sharp CD-DP900H 40 halaman. Mini component system
Juga untuk Sharp CD-DP900H: Panduan Pengoperasian (40 halaman)

Halaman Cetak
Sharp CD-DP900H Panduan Pengoperasian
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news, sports, traffic pro-
gramme, etc. ... see page 24) from the stations in memory.
1
Press the TUNER (BAND) button to select the FM.
2
Press the PTY.TI SEARCH button.
"PTY TI" and "SELECT" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the PRESET (
programme type.
Each time the button is pressed, the programme type will appear. If the button is held
down for more than 0.5 seconds, the programme type will appear continuously.
4
Whilst the selected programme type is flashing (within 6 seconds),
press the PTY.TI SEARCH button again.
After the selected programme type has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
Notes:
If the display has stopped flashing, start again from step 2. If the unit finds a
desired programme type, the corresponding channel number will flash for about 4
seconds, and then the station name will flash for 7 seconds, which will remain lit.
If you want to listen to the same programme type of another station, press the
PTY.TI SEARCH button whilst the channel number or station name is flashing. The
unit will look for the next station.
If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 4, "TP" will appear. (This does not
mean that you can listen to the traffic information at that time.)
When a traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the sta-
tions stored in memory.
Before starting this operation, you must store one or more station names in memory.
1
Press the TUNER (BAND) button to select the FM band.
2
Press the PRESET (
or
) button to select the
3
The station name will be displayed for 6 seconds. Then the display will change as
follows.
or
) button to select a desired station.
02/1/9
CD-DP900H(H)_3.fm
CD-DP900H
ENGLISH
1
2
3
4
5
6
7
8
E-26