Digit-KD VISION series Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Papan tombol Digit-KD VISION series. Digit-KD VISION series 12 halaman. Remote keypad with lcd display

Halaman Cetak
ENGLISH
1
2
Buttons
Button
Buttons
Forward
Backward
(fire).
Button
Button
Display
MAINT
OK
Hardwire control panel
N.B.
Unless otherwise indicated in this instruction manual, you will see only the
(*) Visualization of menu
The menu can be seen regardless of the control panel status (maintenance, control panel
disarmed, control panel armed in Day, Night or Test-Control mode).
In the following example the status of the control panel is in Maintenance.
Pressing the "FORWARD" button, next to the status
of the control panel the 1
battery status, 24 hour line and fire.
By pressing the same button again, the 2
will be visualized, showing status of the first 4 zones.
By newly pressing the same button, the 3
menu will be visualized, showing the status of
the other 4 zones.
To remove the menu from the display, newly
press the "FORWARD" button or wait for the
automatic cancellation that takes place after 40
seconds.
By pressing the "BACKWARD" button, the menu will run in the opposite direction.
The dots (flashing or with fixed light) on the display
indicate the zones in alarm or alarm memory.
In the example on the right zones 3 and 4 have been
triggered and an alarm has taken place.
Page 4
0
Are used to digit the access code.
- Confirm after having digited the access code.
- While by-passing zones, allows you to pass to the next
group of zones to program.
Allow to visualize, in group of 4, the list of all zones (max
40), plus low battery (Bat), tamper (Tmp) and Firendio
- Arming in Night and Test-Control mode.
- Allows
to
modify the
by- passing zones.
Allows you to enter into zone by-pass mode and to pass
to the next zone while by-passing the zones.
MAINT
RF
Visualizes
OK
operations executed.
The square symbols that appear next to RF
Wireless control panel
indicate presence of a radio signal. The more
square dots present, the stronger is the RF signal.
th
menu is visualized:
nd
menu
rd
.
zone configuration
the control
panel
status
MAINT
Bat
Tmp
1°
OK
Firendio
MAINT
1
2°
OK
3
MAINT
5
3°
OK
7
MAINT
OK
1
MAINT
3
OK
Digit-KD instruction manual
while
and all
2
4
6
8
2
4