Bitspower BPTA-WTSC180-CLBK Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Komputer Bitspower BPTA-WTSC180-CLBK. Bitspower BPTA-WTSC180-CLBK 9 halaman.

Notice

Before filling in the water, please make sure all the components are

installed correctly. To prevent any leakage which may damage the PC

components, please perform a 24-hour leaking test with only the pump

connected to the power supply.

Bitspower reserves the right to change the product design and

interpretations. These are subject to change without notice. Product

colors and accessories are based on the actual product.

When using leak tester on water cooling loop, in order to avoid product

damage due to excessive pressure, the input pressure should not exceed

0.5kg/cm

(Bar). If the product is damaged due to

excessive pressure, it will be borne by the customer. Forbidden to use the

leak teser when there is water in the loop or the pump is runing.

Bitspower recommends that consumers add the Bitspower dye to distilled

water or purified water for their water-cooling liquid. If the consumer

chooses different water-cooling liquids, the resulting impurities may cause

peeling of the coating on some of the hardware, water channels blockage

by built-up residue, improper operation of the water pump, water tank

tube breakage, and o-rings deformation leading to leakage. Any issues

related to the use of inappropriate water-cooling liquid will be the

responsibility of the consumer.Do not turn on the pump if the reservoir is

empty.

[ 3 ]