Samsung 225BW - SyncMaster - 22" LCD Monitor Panduan Memulai Cepat - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Monitor Samsung 225BW - SyncMaster - 22" LCD Monitor. Samsung 225BW - SyncMaster - 22" LCD Monitor 16 halaman.
Halaman CetakCheck List
Before calling for service, check the information in this section to see if you can remedy any
problems yourself. If you do need assistance, please call
Information section or contact your
Symptom
No images on the
Is the power cord connected
screen. I cannot
properly?
turn on the monitor.
Can you see "Check Signal
Cable" on the screen?
If the power is on, reboot the
computer to see the initial
screen(the login screen), which
can be seen.
Can you see "Not Optimum
Mode","Recommended Mode
1680 x 1050 60 Hz" on the
screen?
dealer.
Check List
Check the power cord connection and
supply.
(Connected using the D-sub cable)
Check the signal cable connection.
(Connected using the DVI cable)
If you still see an (error) message on the
screen when the monitor is connected
properly, check to see if the monitor status
is set to analog.
Press
check the input signal source.
If the initial screen (the login screen)
appears, boot the computer in the
applicable mode (the safe mode for
Windows ME/XP/2000) and then change
the frequency of the video card.
(Refer to
Note: If the initial screen (the login screen)
does not appear,
or your
You can see this message when the signal
from the video card exceeds the maximum
resolution and frequency that the monitor
can handle properly.
Adjust the maximum resolution and
frequency that the monitor can handle
properly.
If the display exceeds SXGA or 75 Hz, a
"Not Optimum Mode","Recommended
Mode 1680 x 1050 60 Hz" message is
displayed. If the display exceeds 85 Hz, the
display will work properly but the "Not
Optimum Mode","Recommended Mode
the phone number on the
Solutions
button to have the monitor double-
Preset Timing
Modes)
contact the Service Center
dealer.