Samsung 5 Series Panduan Pengguna - Halaman 3

Halaman Cetak

ATV,

AV, Component

(480i,

480p)

16:9, Zoom1,

Zoom2,

4:3

DTV (1080i,

1080p),

Component

(1080i, 16:9, Wide Fit,

1080p),

HDMI

(720p,

1080i,

1080p)

4:3, Screen

Fit

[]Digital Noise Filter (Off

/ Low / Medium / High / Auto) : If the

broadcast signal received by your TV is weak, you can activate

the Digital Noise Filter feature to reduce any static and ghosting

that may appear on the screen.

'_' When the signal is weak, try all the Digital Noise Filter

options until the TV displays the best picture.

[] HDMI Black Level (Normal / Low) : For HDMI signals, select

the black level to adjust the screen depth. Low make blacks look

darker.

Available only in HDMI mode (RGB signals).

[] Film Mode (Off / Auto) : Sets the TV to automatically sense and

process film signals from all sources and adjusts the picture for

optimum quality.

'_' Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

[] LED Motion Plus (Off/On):

Removes drag from fast scenes

with a lot of movement to provide a clear picture.

Picture Reset

[] Picture Reset (Reset Picture Mode/Cancel):

Resets the

picture settings to their factory defaults.

Mode

[] Standard: Selects tile normal sound mode.

[] Music: Emphasizes music over voices.

[] Movie: Provides the best sound for movies.

[] Clear Voice: Emphasizes voices over other sounds.

[] Amplify: Increase the intensity of high-frequency sounds to allow

a better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

[] Balance L/R: Adjusts the balance between the right and Idt

speaker.

[] 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the loudness of specific bandwidth

frequencies.

[] Reset: Resets the equalizer to its default settings.

SRS TruSurround HD (On/Off)

Available in Standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves

the problem of playing 5.1 multichannel content through two

speakers. TruSurround delivers a compelling, virtual surround

sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all

multichannel formats.

Preferred Language

Digital channels only.

DigitaI-TV broadcasts can transmit many audio tracks

simultaneously (for example, simultaneous translations of a program

into foreign languages).

'_' You can only select a language from among the ones being

broadcast.

Multi=Track Sound (MTS)

Analog channels only.

[] Mono: Select for channels that are broadcasting in mono or if

you are having difficulty receiving a stereo signal.

[] Stereo: Select for channels that are broadcasting in stereo.

[] SAP: Select to listen to the Separate Audio Program, which is

usually a foreignqanguage translation.

'_'

Depending on the program being broadcast, you can listen to

Mono, Stereo or SAR

Auto Volume

Because each station has its own broadcasting conditions, the

volume may fluctuate each time you change the channel. This

feature automatically adjusts the volume of a channel by lowering

the sound output when the modulation signal is high or by raising

the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital h_terFace) outputs an

uncompressed digital audio signal when you connect the digital

audio jack on the back of the TV to a digital audio in jack on a

receiver or home theater.

[] Audio Format (PCM/Dolby

Digital): You can select the Digital

Audio output (SPDIF) format. The available Digital Audio output

format may differ depending on the input source.

's_' By connecting the TV to a receiver or home theater with

Dolby Digital and 5.1ch speakers and selecting Dolby

Digital, you can maximize your interactive 3D sound

experience.

[] Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and

listening to digital audio output from the TV through an external

device such as an AV receiver. When you select Audio Delay, a

slider appears. Use the left and right arrow buttons to adjust the

slider. Press ENTER_

when done (0ms _ 250ms).

Speaker Settings

[] Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie

through an external receiver, you may hear a sound echo caused

by the difference in decoding speed between the TV's speakers

and the speakers attached to your audio receiver. If this occurs,

set the TV to External Speaker.

'_' When you set Speaker Select to External Speaker, the

TV's speakers are turned off. You will hear sound through

the external speakers only. When you set Speaker Select

to TV Speaker both the TV's speakers and the external

speakers are on. You will hear sound through both.

'_' When Speaker Select is set to External Speaker, the

VOLUME and MUTE buttons will not operate and the

sound settings will be limited.

'_'

If there is no video signal, both the TV's speakers and the

external speakers will be mute.

Sound

Reset

[] Reset All: Resets all sound settings to the factory defaults.

_3_