Cisco 7940G Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 7940G. Cisco 7940G 35 halaman. Ios telephony services ip phone
Juga untuk Cisco 7940G: Panduan Pengguna (21 halaman), Panduan Pengguna (25 halaman), Lembar data (7 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (15 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Telepon (17 halaman), Panduan Administrator (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi (24 halaman), Panduan Administrasi (29 halaman), Manual (21 halaman), Panduan Instalasi (12 halaman), Panduan Pengguna (10 halaman)

5. Configuring for the Extended Feature Set

In addition to the steps outlined in Section 4, the following additional administration steps are

required to support the extended feature set on the Cisco 7940/7960 SIP telephones:

1. On Communication Manager, define stations corresponding to those specified on the

Avaya Converged Communications Server, off-PBX station mappings to route call

requests involving those stations to the Avaya Converged Communications Server, and

off-PBX Feature Name Extensions (FNEs) for invoking the extended features.

2. Define the appropriate address map in the Avaya Converged Communications Server so

that FNEs and other Outboard Proxy SIP station extensions dialed at the phone will be

routed to Communication Manager.

3. Add parameters to the default phone configuration file to support voice message access

and Communication Manager off-PBX station mapping.

4. Administer speed dial buttons on the phone for frequently used FNEs.

The following sections describe the administration details for these steps.

5.1. Configure Avaya Communication Manager

This section highlights the important commands for defining SIP telephones as Outboard Proxy

SIP stations on Communication Manager. For complete documentation, see Reference [4]. Use

the System Access Terminal (SAT) interface to perform these steps. Log in with the appropriate

permissions.

5.1.1. Verify Outboard Proxy SIP Capacity

Use the display system-parameters customer-options command to verify that Maximum Off-

PBX Telephones – OPS has been set to a value that will accommodate the number of phones to

be used. Avaya Services has provisioned this during installation according to the system

configuration purchased.

Display system-parameters customer-options

G3 Version: V12

Location: 1

Platform: 7

FAS; Reviewed:

WCH 10/22/2004

OPTIONAL FEATURES

Maximum XMOBILE Stations: 0

Maximum Off-PBX Telephones - EC500: 5

Maximum Off-PBX Telephones - OPS:

Maximum Off-PBX Telephones - SCCAN: 10

Solution & Interoperability Test Lab Application Notes

RFA System ID (SID): 1

RFA Module ID (MID): 1

Maximum Ports: 100

Page

1 of

USED

15 of 35

Cisco7960SIP.doc