ACD DS260 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Perangkat genggam ACD DS260. ACD DS260 16 halaman.

3.2.9 µSD card

To expand memory space, you find a µSD card slot inside the device. The µSD card is accessible from the

battery case.

Figure 10: Insert the µSD card into the µSD card slot

The microSD card may only be inserted by a briefed person. First carefully lift the black cover film using

tweezers. The cover film strap, under which the microSD card slot is location, must be carefully folded over

and retained in place.

You have to insert the µSD card into the slot with contacts bottom-up. The card will be fixed if the card is

locked noticeably. Then fold the cover film strap back over and run your finger over it in order to re-seal it.

Afterwards insert the battery and boot the M260SE. Now the µSD card will be visible in the Windows

Explorer under the name SDMMCCard2.

Unintended use of the interfaces should be avoided.

ATTENTION

The RFID reader is available in two different designs:



HF RFID



LF RFID

The RFID reader is located on the top of the device, behind the black cover (see Fig. 11).

In order to read an RFID tag, hold the device vertically and centrally over the RFID tag.

HF-RFID

Figure 11: Position RFID reader

M260SE_Brief_Overview_FCC_V1.00_en_es.docx

LF-RFID

12 / 33