Siemens SF 25M855 Panduan Petunjuk Pengoperasian - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin pencuci piring Siemens SF 25M855. Siemens SF 25M855 28 halaman.

Spray arms

Limescale and contaminants in the rinsing

water may block nozzles

and bearings on the spray arms 12

and 1:.

– Check outlet nozzles on the spray

arms for blockages.

– Unscrew the upper spray arm 12.

– Remove the lower spray arm 1:

upwards.

– Clean spray arms under running water.

– Re-engage or screw on spray arms.

The majority of faults which could occur in

daily operation can be rectified by the

user. This ensures that the appliance is

quickly available for use again. The

following overview will help you locating

the causes and gives helpful advise to

eliminate them.

Note

If the appliance stops during dishwashing

or does not start for no obvious reason,

first run the Abort programme function

(Reset).

(See chapter entitled "Dishwashing")

ã=

Warning

Don't forget: Repairs may be carried out

by technicians only. If a component has to

be replaced, ensure that only original

spare parts are used. Improper repairs or

use of non-original spare parts may cause

considerable damage and put the user at

considerable risk.