Ricoh SP 200 Panduan Instalasi Perangkat Lunak - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Instalasi Perangkat Lunak untuk Printer Ricoh SP 200. Ricoh SP 200 21 halaman. Software installation guide
Juga untuk Ricoh SP 200: Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman)
Halaman Cetak
5.
Press the [ ] or [ ] key to select [Off], and then press the [OK] key.
If you change this setting, the machine automatically reboots itself before the procedure can
be completed. When this happens, wait for the reboot to finish, repeat steps 1 to 3, and then
proceed to the next step.
6.
Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.
7.
Enter the machine's IPv4 address using the number keys.
Press the [ ] key to move between fields.
8.
Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
After a setting has been changed, the machine automatically reboots itself.
•
For details about configuring the IPv6 address, see the User Guide .
•
You cannot configure the network settings while the machine is operating (printing, receiving a
fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network
settings are being configured (after clicking [Network Settings]).
14