Epson ELP-3300 - Data/Video Projector Informasi Produk - Halaman 2

Jelajahi secara online atau unduh pdf Informasi Produk untuk Proyektor Epson ELP-3300 - Data/Video Projector. Epson ELP-3300 - Data/Video Projector 2 halaman. Product support bulletin(s)
Juga untuk Epson ELP-3300 - Data/Video Projector: Pengaturan Mudah (1 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (9 halaman), Spesifikasi (1 halaman)

Halaman Cetak

EPSON ELP-3300 Data/Video Projector

Status Lights

The status lights at the top of the projector monitor its

operation.

temperature light 1

lamp light

To reset the lamp indicator after replacing the bulb, turn off

the projector, hold the 'Menu" and 'Sync-" buttons down

then turn the power switch back on. Continue to hold the

buttons down until all three monitor lights flash orange for

about 3 seconds. The lamp dectector is now reset.

Pin Assignments

The following tables describe the pin assignments for the

three connectors of the Y-cable: the LCD connector, the VGA

connector, and the Monitor connector. The pin assignments

for the VGA and Monitor connectors are identical.

LCD connector pin assignments

The LCD connector is a 26-pin D-style connector. Its pin

assignments are as follows:

ELP-3300 - 2

power light

VGA and Monitor connector Pin assignments

The VGA connector is a male video RGB, 15-pin micro-D

style connector, and the Monitor connector is a female video

RGB, 15-pin micro-D style connector. The pm assignments