Actuonix PQ12-GG-VV-P Panduan Konfigurasi Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Konfigurasi Pengguna untuk Pengontrol Actuonix PQ12-GG-VV-P. Actuonix PQ12-GG-VV-P 9 halaman. Usb control and configuration of the linear actuator control board
Halaman CetakManual Quick Start:
The LAC board is static sensitive. Ensure your work area is
static safe prior to removing the board from the static bag or
optional housing.
With all power and USB cables disconnected, connect an actuator to either the screw
terminal header or the Actuonix connectors as described in the datasheet.
PQ12–P : Copper faces contacts
L12–P and L16-P
Other –P : Wire colours may differ
Connect the external potentiometer, control signal, or RC connector.
External Pot : Wiper wire to VC
Signal : Connect RC, IC, or VC
RC Receiver : Standard Connector
If connecting a signal to RC, IC, or VC, make sure the signal ground is connected to the
power supply ground (-).