Cisco TelePresence MX700 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence MX700. Cisco TelePresence MX700 29 halaman. Single camera on a free standing floor stand or a floor stand secured to the wall
Juga untuk Cisco TelePresence MX700: Panduan Instalasi (32 halaman), Panduan Memulai Cepat (12 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (32 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (29 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence MX700 Panduan Instalasi
Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
7
Fasten left monitor to floor stand and connect power cable
4 ×
4 ×
1
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
M6x90,
countersunk
M6x35,
countersunk
Enter four screws from
front and four screws from
underneath. Then, tighten
all screws.
Connect power cable
2
A power cable is strapped at the
rear of the monitor. Connect it to the
close-by socket.
Let the other end hang freely. It will
be connected to the right monitor in
step 9.
Page 12