Cisco 3020 - Cisco Catalyst Blade Switch Panduan Memulai - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat Keras Jaringan Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 31 halaman. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Juga untuk Cisco 3020 - Cisco Catalyst Blade Switch: Panduan Memulai (37 halaman), Quickspecs (12 halaman), Catatan Rilis (41 halaman), Catatan Rilis (27 halaman), Catatan Rilis (23 halaman), Catatan Rilis (21 halaman), Panduan Instalasi (21 halaman)

Halaman Cetak

Cisco 3020 - Cisco Catalyst Blade Switch Panduan Memulai

Figure 10

Device Manager Page for the Cisco Catalyst Blade Switch 3020 for HP

Use the device manager to perform basic switch module configuration and monitoring. See the

Step 3

device manager online help for more information.

For more advanced configuration, download and run the Cisco Network Assistant, which is

Step 4

described in the next section.

Using the Command-Line Interface

You can enter Cisco IOS commands and parameters through the CLI. Access the CLI either by

connecting your PC directly to the switch module console port or through a Telnet session from a

remote PC or workstation.

Follow these steps:

Connect the supplied RJ-45-to DB-9 adapter cable to the standard 9-pin serial port on the PC.

Step 1

Connect the other end of the cable to the console port on the switch module.

Start a terminal-emulation program on the PC.

Step 2