Cisco ASA 5545-X Manual Perangkat Lunak - Halaman 15

Jelajahi secara online atau unduh pdf Manual Perangkat Lunak untuk Perangkat Keras Jaringan Cisco ASA 5545-X. Cisco ASA 5545-X 37 halaman. Threat defense reimage guide
Juga untuk Cisco ASA 5545-X: Panduan Petunjuk Instalasi (13 halaman), Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (15 halaman)

Halaman Cetak

Cisco ASA and Firepower Threat Defense Reimage Guide

sync

tftpdnld

The ASA image downloads and boots up to the CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 2 > interface gigabitethernet0/0

rommon 3 > address 10.86.118.4

rommon 4 > netmask 255.255.255.0

rommon 5 > server 10.86.118.21

rommon 6 > gateway 10.86.118.1

rommon 7 > file asalatest-smp-k8.bin

rommon 8 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=asalatest-smp-k8.bin

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 9 > sync

Updating NVRAM Parameters...

rommon 10 > tftpdnld

Example for the ASA 5506-X:

rommon 2 > address 10.86.118.4

rommon 3 > netmask 255.255.255.0

rommon 4 > server 10.86.118.21

rommon 5 > gateway 10.86.118.21

rommon 6 > file asalatest-lfbff-k8.SPA

rommon 7 > set