Cisco ASA 5580 Panduan Memulai Cepat - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco ASA 5580. Cisco ASA 5580 40 halaman. Asa 5500 series adaptive security appliance
Juga untuk Cisco ASA 5580: Panduan Memulai Cepat (13 halaman)

Halaman Cetak
Cisco ASA 5580 Panduan Memulai Cepat

Connecting Interface Cables and Verifying Interface Connectivity

Step 5
Connecting Interface Cables and Verifying Interface
Connectivity
Step 1
Step 2
Cisco ASA 5580 Series Quick Start Guide
4-4
Check the System LED on the front of the ASA; once it is solid green, the system
has passed power-up diagnostics.
Connect to the Management 0/0 interface so that you can use ASDM to manage
the ASA.You can connect it directly with an Ethernet cable, or connect the PC and
the ASA to the same management network. Make sure the PC is configured to
obtain an IP address using DHCP.
The ASA 5580 has 2 management interfaces (Management 0/0 and
Note
Management 0/1); however, only Management 0/0 is configured for use.
If you want to use the CLI, connect your PC to the console port and see
Note
the CLI configuration guide for more information.
Connect your networks to the appropriate ports.
The ASA 5580 has nine expansion slots. Slots 3 through 8 support PCI
Note
Express network interface adapters. Slots 1, 2, and 9 are reserved. Your
exact configuration depends on the configuration you purchased.
Chapter 4
Installing the ASA 5580
78-19753-01