Cisco PIX-515E Panduan Memulai Cepat - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco PIX-515E. Cisco PIX-515E 42 halaman. Security appliance
Juga untuk Cisco PIX-515E: Panduan Memulai Cepat (42 halaman)

Halaman Cetak

Command

dhcpd lease 3600

Step 6

dhcpd ping_timeout 750

Step 7

dhcpd auto_config outside

Step 8

dhcpd enable inside

Step 9

Step 10 http 192.168.1.0 255.255.255.0

inside

Step 11 http server enable

Step 12 pdm history enable

Step 13 pdm logging informational 100

Step 14 write memory

Step 15 exit

Refer to the following website for detailed command information and configuration examples:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/index.htm

The Cisco TAC website is available to all customers who need technical assistance. To access the TAC

website, go to:

http://www.cisco.com/tac

Description

Specifies the length of the lease (in seconds) granted to

the DHCP client. The lease indicates how long the

DHCP client can use the assigned IP address.

Allows the configuration of the timeout value of a ping,

(in milliseconds), before assigning an IP address to a

DHCP client.

Enables the PIX Firewall to automatically configure

DNS, WINS, and domain name values from the DHCP

client to the DHCP server. If you specify dns, wins, and

domain parameters, then the CLI parameters overwrites

the auto_config parameters from the outside interface

of the firewall.

Enables the DHCP daemon to begin listening for DHCP

client requests on the inside interface.

Enables PDM access to all hosts on the inside network.

Enables an HTTP server for PDM access to the

PIX 515E.

Takes a data sample and stores the sample data in the

PDM history buffer.

Specifies the type and number of syslog messages

displayed.

Saves the modified configuration to permanent memory.

Exits the current configuration mode.