Cisco RSP7000 Menginstal - Halaman 25
Jelajahi secara online atau unduh pdf Menginstal untuk Perangkat Keras Jaringan Cisco RSP7000. Cisco RSP7000 26 halaman. Upgrade kit in the cisco 7000 series routers
Juga untuk Cisco RSP7000: Panduan Instalasi dan Konfigurasi (48 halaman)
Halaman CetakRSP7010#sho env all
Arbiter type 1, backplane type 70x0 (id 5)
Power supply #1 is 600W AC (id 1)
Active fault conditions: none
Active trip points: none
Dbus slots:
card
CI(4)
Shutdown temperature source is 'hotpoint' on CI(4),
requested CI(4)
+12V measured at 12.31
+5V measured at 5.17
-12V measured at -11.89
+24V measured at 23.78
+2.5 reference is 2.49
If after several attempts, any component does not appear to be functioning properly, or if you
experience trouble with the installation (for instance, if the holes in the board do not align with the
backplane holes), contact a service representative or the Technical Assistance Center (TAC). (For
the TAC phone number and email address, refer to the note at the end of this document.
This completes checking the RSP7000CI installation, and also completes the RSP7000 upgrade kit
installation.
01234
X X
inlet
hotpoint
22C/71F
34C/93F
Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers
Checking the Installation
exhaust
24C/75F
25