AcueLighting Profile S300 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ AcueLighting Profile S300. AcueLighting Profile S300 9 halaman. 300w led framing profile spotlight

Halaman Cetak

You can set the same starting address for all fixtures or a group of fixtures, or make different address for each

fixture individually.

If you set the same address, all the units will start to listen to the same control signal from the same channel

number. In other words, changing the settings of one channel will affect all the fixtures simultaneously.

If you set a different address, each unit will start to listen to the channel number you have set, based on the

quantity of control channels of the unit. This means changing the settings of one channel will affect only the

selected fixture.

In the case of the LED Profile 300WW, which is 1/2/3 channels fixture. If you set, for example, the address in the 1

channel mode to channel 2, the device will use the channel 2 for control.

Note: After switching on, the device will automatically detect whether DMX 512 data is received or not. If

there is data received at the DMX input, you will see the DMX indicator light in green.

Universal DMX Control

This function allows you to use a universal DMX-512 controller to control the dimmer and strobe of each fixture. A

DMX controller allows you to create unique programs tailored to your individual needs.

RDM control

The LED Profile 300WW can communicate using RDM (Remote Device Management) in accordance with

ESTA's American National Standard E1.20-2006: Entertainment Technology RDM Remote Device Management

Over DMX512 Networks.

RDM is a bi-directional communications protocol for use in DMX512 control systems; it is the open standard for

DMX512 device configuration and status monitoring.

The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting existing non-

RDM equipment. It allows a console or dedicated RDM controller to send commands to and receive messages from

specific fixtures.

With RDM function, you can set the DMX address of your fixtures remotely. This is especially useful when the

device is installed in a remote area.

Each LED Profile 300WW fixture has a factory set RDM UID (unique identification number).

V1.0