Cisco SCE8000 GBE Prosedur Penghapusan dan Penggantian - Halaman 33
Jelajahi secara online atau unduh pdf Prosedur Penghapusan dan Penggantian untuk Perangkat Keras Jaringan Cisco SCE8000 GBE. Cisco SCE8000 GBE 36 halaman. 10gbe platform
Juga untuk Cisco SCE8000 GBE: Panduan Memulai Cepat (25 halaman), Panduan Konfigurasi (18 halaman), Menginstal (21 halaman)
Halaman Cetak
Chapter 9 Removal and Replacement Procedures
Removing a SPA from a SIP
To remove a SPA from a SIP, see
At the SCE# prompt, enter reload shutdown and press Enter to power down the Cisco SCE 8000
Step 1
platform before installing or removing any module.
If attached, remove any cables from the SPA.
Step 2
To remove the SPA from the SIP, unfasten the captive installation screws on the SPA.
Step 3
Grasp the handles of the SPA and pull the SPA from the SIP.
Step 4
OL-26784-02
Figure 9-17
and do the following:
Cisco SCE8000 10GBE Installation and Configuration Guide
Removing a SPA from a SIP
9-33