Cisco UBR7246VXR Panduan Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat Keras Jaringan Cisco UBR7246VXR. Cisco UBR7246VXR 28 halaman. Universal broadband router
Juga untuk Cisco UBR7246VXR: Panduan Memulai Cepat (27 halaman), Panduan Pengguna (7 halaman), Instalasi Perangkat Keras (25 halaman)
Halaman Cetak
Chapter 1
Overview
Table 1-2
LED
LOS (Primary)
LOS (Secondary)
ACTIVE (Primary)
ACTIVE (Secondary)
ENABLE
HOLDOVER
FREERUN
FAULT
Clock Card Location in the Cisco uBR7246 VXR Chassis
The chassis slot of the Cisco uBR7246 VXR chassis into which the clock card can be installed is on the
left side of the chassis immediately below port adapter slot 1.
with the clock card installed.
OL-26705-01
Clock Card LED Descriptions
Color
Yellow
Yellow
Green
Green
Green
Yellow
Yellow
Amber
Cisco Cable Clock Card Hardware Installation Guide for the Cisco uBR7246VXR Universal Broadband Router
Clock Card Location in the Cisco uBR7246 VXR Chassis
Description
Indicates that the clock card has lost contact with the primary
external clock source.
Indicates that the clock card has lost contact with the secondary
external clock source.
Indicates that the clock card is currently locked to the primary
external clock source signal.
Indicates that the clock card is currently locked to the secondary
external clock source signal.
Indicates that the clock card is correctly installed in and
recognized by the Cisco uBR7246 VXR chassis.
Indicates that the clock card has lost contact with the current
primary and/or secondary external clock source(s) and has
entered holdover mode. This means that the clock card was
locked to an external clock signal for at least 25 seconds before
losing contact and has temporarily become the clock source for
the Cisco uBR7246 VXR.
Indicates that the clock card has lost contact with both the
primary and secondary external clock sources and has
inadequate storage from prior connection to enter holdover
mode. Unlike holdover mode, entering freerun mode means that
the clock card was initially unable to lock on to either a primary
or secondary external clock signal.
Freerun mode is most commonly encountered at startup
Note
when the clock card is unable to recognize an external
clock source.
Indicates a hardware failure with the clock card circuitry.
Figure 1-4
shows a Cisco uBR7246 VXR
1-5