Cisco ASR 9000 Series Panduan Konfigurasi - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Gerbang Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 halaman. Line card
Juga untuk Cisco ASR 9000 Series: Mengkonfigurasi Pengaturan Jaringan (26 halaman), Panduan Konfigurasi (50 halaman), Manual (24 halaman), Mengkonfigurasi (46 halaman), Manual (44 halaman), Panduan Referensi Cepat (7 halaman)
Halaman Cetak
How to Configure Clear Channel T3/E3 Controllers and Channelized T1/E1 Controllers
Configuring a Clear Channel T3 Controller
When a T3 controller is in clear channel mode, it carries a single serial interface.
The T3 controllers are configured in the T3 configuration mode.
Prerequisites
Before you can configure a clear channel T3 controller on a channelized SPA, you must configure the
SPA for an STS stream channelized for T3. For more information, see the
SONET/SDH on the Cisco ASR 9000 Series Router"
Restrictions
•
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
controller t3 interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# controller t3
0/1/0/0
Step 3
mode serial
Example:
RP/0/RSP0/CPU0:router(config-t3)# mode serial
Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide
460
Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router
If you configure an option that is not valid for your controller type, you receive an error when you
commit the configuration.
A single SPA cannot support a mixture of T3 and E3 interfaces.
configure
controller t3 interface-path-id
mode serial
no shutdown
end
or
commit
show controllers t3 interface-path-id
module.
Purpose
Enters global configuration mode.
Specifies the T3 controller name in the
rack/slot/module/port notation and enters T3 configuration
mode.
Configures the mode of the port to be clear channel
Note
serial.
"Configuring Channelized
OL-32684-01