Cisco VG202 Panduan Pemasangan Perangkat Keras - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Gerbang Cisco VG202. Cisco VG202 48 halaman. Voice gateways
Juga untuk Cisco VG202: Panduan Konfigurasi Perangkat Lunak (50 halaman), Panduan Pemasangan Perangkat Keras (50 halaman), Manual (10 halaman), Panduan Memulai Cepat (19 halaman)

Chapter 3

Installing the Voice Gateway

Figure 3-5

Connecting Cables

•

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Statement 1001

Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that

Warning

the protective device is rated not greater than: 120 VAC, 15A (240 VAC, 10A international)

Statement 1005

To prevent accidental discharge in the event of a power line cross, route on-premise wiring away

Warning

from power cables and off-premise wiring, or use a grounded shield to separate the on-premise

wiring from the power cables and off-premise wiring. A power line cross is an event, such as a

lightning strike, that causes a power surge. Off-premise wiring is designed to withstand power line

OL-15959-01

Chassis Ground Connection Using Ring Terminal

V G 2 0 4

Fa st Et he rn

CO NS O LE

FX S

0/ 1

0/ 0

AU X

0/ 3

0/ 2

0/ 1

0/ 0

Ring terminal attachment

Warnings, page 3-9

Connecting Input Power to the Chassis, page 3-10

Connecting a Terminal or PC to the Console Port, page 3-10

Connecting an FXS Line, page 3-11

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide

12 V D C

S A

Connecting Cables

3-9