8
Connect the EPSON Stylus
Scan to your computer
and install the software
You'll follow different instructions, depending on
what type of system you have:
Windows
Windows 95 or 98 with parallel connection
USB port
Before you start, make sure you have the two CD-ROMs that came in the
box with your EPSON Stylus Scan. If you don't have a CD-ROM drive,
contact EPSON as described in your User's Guide.
Windows 98 with USB:
Making the connection
First you'll connect the EPSON Stylus Scan to your computer, then you'll
install the software.
To connect the printer, you'll need a shielded USB "AB" interface cable,
not more than 6.5 feet long.
Connecting Your EPSON Stylus Scan
1. Make sure your computer is turned on.
2. Turn on the printer by pressing the
5. Follow the instructions in the next section to install your software.
If you're using a USB hub, connect the printer to a first tier
CAUTION
hub, which is the hub closest to the host computer. If the
printer doesn't work with the hub, connect it directly to a USB port on your
computer.
Installing Your Driver Software
Make sure you have your Microsoft
NOTE
available. If you don't have this CD-ROM, make sure you know
where to find the Windows
98
Win
folder.) If you need help, contact your computer manufacturer.
98
Your computer will install several USB devices. D D o o n n ' ' t t c c l l i i c c k k C C a a n n c c e e l l a a t t a a n n y y t t i i m m e e
d d u u r r i i n n g g t t h h e e i i n n s s t t a a l l l l a a t t i i o o n n p p r r o o c c e e s s s s . .
1. Click Next, then continue clicking
Next on each window that appears.
2. If you see a message asking for your
Windows 98 CD-ROM, insert it and click
OK (or select Specify a location, click
Browse, and locate the Windows 98
source files on your hard disk drive.)
3. When you see the message that
Windows has finished installing, click
F F i i n n i i s s h h . Windows detects a USB printer.
4. Remove the Windows 98 CD-ROM (if necessary) and insert the EPSON Stylus
Scan 2500 software CD-ROM.
5. Repeat step 1. When you see the window shown in the next step, select
Specify a location, click Browse, and locate the Epson folder on your EPSON
Stylus Scan 2500 software CD-ROM.
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. General notice: Other product names are for identification purposes only and may be trademarks of their respective owner. EPSON disclaims any and all rights in those ma
®
98 with USB connection
®
Macintosh
with USB connection
Parallel port
Operate button.
3. Connect the square end of the USB
cable to your printer's USB port.
4. Connect the flat end of the USB cable to
your computer's USB port or USB hub
port. Windows detects your printer.
®
®
Windows
CD-ROM
98
source files on your hard disk (for example, in the
6. Click Next, then follow the instructions on
7. When you see the EPSON Screen
8. Click Finish. Windows detects the scanner portion of your EPSON Stylus
Scan 2500.
Finishing the Software Installation
1. Click Next, then continue clicking Next on each window that appears.
2. Make sure the EPSON Stylus Scan 2500 software CD-ROM is in your drive.
If you need to specify a location, click Browse, and locate the Epson folder
on your EPSON Stylus Scan 2500 software CD-ROM. Then click Next and
follow the instructions on the screen.
3. When you see a message that setup is complete, click OK, then click
Finish.
4. Double-click My Computer on your desktop.
5. Double-click the Epson_ss2500 CD-ROM icon. Then double-click C C d d s s e e t t u u p p .
6. Click the
Add Software button.
8. Follow the on-screen instructions to install the EPSON Smart Panel
When the installation is complete, you see the EPSON Stylus Scan Setup
window. Click Next.
Installing Adobe
®
PhotoDeluxe
1. Follow the on-screen instructions to install Acrobat
After each installation is complete, the next one begins automatically.
D D o o n n ' ' t t r r e e s s t t a a r r t t y y o o u u r r c c o o m m p p u u t t e e r r u u n n t t i i l l a a l l l l t t h h e e p p r r o o g g r r a a m m s s h h a a v v e e b b e e e e n n i i n n s s t t a a l l l l e e d d .
You may need to switch between the EPSON Stylus Scan 2500 software
CD-ROM and your Microsoft Windows 98 CD-ROM again.
2. If you see a message requesting a disk labeled "DLL Installations," click
OK, click Browse, click OK, then click OK again. (You may have to highlight
the folder whose name begins with mse in the Browse box.)
3. After WinFax has installed, click Finish to restart your computer.
Follow the instructions on the screen to configure and register WinFax.
4. Insert your Adobe PhotoDeluxe CD-ROM. Follow the instructions to accept
the license agreement and install PhotoDeluxe.
5. When you see another message asking to restart your computer, click OK.
For eFax installation instructions, see you User's Guide.
Now you're ready to print, scan, and copy. See your User's Guide for instructions.
Windows 95 or 98 with parallel :
Making the connection
First, you'll connect the EPSON Stylus Scan to your computer, then you'll
install the software.
To connect the printer, you'll need a high-speed, bidirectional, IEEE-1284
parallel cable, not more than 6 feet long.
If you have a USB port ( Windows 98 only), we recommend using it rather
than the parallel port. See the previous section for instructions.
the screen to complete the installation. You
may need to switch between the EPSON
Stylus Scan 2500 software CD-ROM and
your Windows 98 CD-ROM several times.
Calibration utility, move the slider right or
left until the stripes match as closely as
possible. Then click OK.
7. M M a a k k e e s s u u r r e e
a a l l l l i i t t e e m m s s a a r r e e
c c h h e e c c k k e e d d . Then
click OK.
™
.
9. Select USB, then click Next.
Continue with the instructions
in the next section.
®
and Additional Software
®
Reader and WinFax
®
.
Halaman Cetak