Epson TM-H6000IIIP Panduan Pengembangan - Halaman 44
Jelajahi secara online atau unduh pdf Panduan Pengembangan untuk Pemindai Epson TM-H6000IIIP. Epson TM-H6000IIIP 45 halaman.
Juga untuk Epson TM-H6000IIIP: Panduan Pengembangan (26 halaman), Panduan Pengembangan (32 halaman)
Halaman Cetak
• Please note that the setting value of the RemainingImagesEstimate
property may drastically change at the execution of the storeImage method
when the size of "the image to store" is quite different from the size of "the
last stored image" since the value set to the RemainingImagesEstimate
property is based on "the last stored image".
The following are precautions about the CHK_DI_EXTEND_TMSTORE
command.
• Capacity of the device's Storage Memory is 16 MB.
• Bi-tonal JPEG image data cannot be stored to the device.
When bi-tonal JPEG is specified as the format, replace it with TIFF then
store the data.
• Size auto-adjustment is not executed.
• The contrast of an image cannot be adjusted when it is being stored onto
the device.
• When the EndInsertion method is executed under the condition of
CHK_DI_EXTEND_TMSTORE is set, no data is stored to the working
buffer memory area.
property and the DocumentHeight property that indicate information size
are not updated.
• It is not supported to retrieve stored image data from the Storage Memory
of the device. The program specified for reading from Storage Memory of
the device should be used for reading the stored image. Please refer to
"EPSON OPOS ADK MANUAL TM Storage OCX MANUAL TM Storage
OCX" for details. The file name of this manual is "TMStorage.pdf". It is
placed in the "Manual" folder in the directory where OPOS is installed.
• When the EndInsertion method is executed under the condition of
CHK_DI_EXTEND_TMSTORE
command and the CHK_DI_ROTATEIMAGE command settings become
invalid.
The following are precautions about the CHK_DI_CHANGE_MODE
command.
• For executing card reading, switching the reading mode to card scanner
mode by executing the CHK_DI_CHANGE_MODE command of DirectIO is
APPLICATION DEVELOPMENT GUIDE
Therefore, the values of the DocumentWidth
is
set,
41
CheckScanner
Version 3.00 Feb. 2019
the
CHK_DI_SIZE_OFFSET