3Com SuperStack II Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan 3Com SuperStack II. 3Com SuperStack II 6 halaman. Switch matrix module
Juga untuk 3Com SuperStack II: Panduan Pengguna (4 halaman), Panduan Pengguna (9 halaman), Panduan Pengguna (2 halaman), Lembar Tambahan (1 halaman), Informasi Penting (2 halaman)

Halaman Cetak

1 Ensure that your Switches are correctly installed and that

you have the correct number of Matrix Cables for your con-

figuration. We recommend that the bottom unit in your

stack is the one that contains the Matrix Module.

2 Working first with the Switch that contains the Matrix Mod-

ule, attach a Matrix Cable to one of the ports on the Matrix

Module. Connect the other end of that cable to the matrix

port on the same unit. For your stack to operate as one

unit, you must do this.

3 Connect each of the remaining cables between the ports on

the Matrix Module and the matrix port on each unit.

4 Connect your power cord and power-up the stack.

Ordering Matrix Cables

Matrix Cables are available from your supplier:

Product Title

SuperStack

II Switch Matrix Cable

Technical Specification

Operating Temperature

Storage Temperature

Operating Humidity

Power Consumption

Standards:

Safety

EMC

Emissions

Immunity

Environmental

Part Number

3C16965

0° to 50°C (32° to 122°F)

–10° to 70°C (14° to 158°F)

10 to 95% non-condensing

(@ 5V DC) 800mA maximum (4W maxi-

mum)

UL 1950

EN60950

CSA22.2#950

EN55022 Class B, FCC Part 15 Subpart

B Class A, ICES-003 Class A, AS/NZS

3548 Class B, VCCI Class B,

EN50082-1

EN60068 (IEC 68)

EMC Statements

FCC Statement: This equipment has been tested and

found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful

interference when the equipment is operated in a commer-

cial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harm-

ful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference to radio communications, in which case the

user will be required to correct the interference at their own

expense.

CSA Statement: This Class A digital apparatus meets all

requirements of the Canadian Interference-Causing Equip-

ment Regulations.

Cet appareil numérique de la classe A respecte toutes les

exigences du Règlement sur le matériel brouilleur du Can-

ada.