Toshiba 20A23 Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk TV Toshiba 20A23. Toshiba 20A23 16 halaman. Toshiba portabler tv 20a23
Juga untuk Toshiba 20A23: Panduan Pemilik (33 halaman), Panduan Servis (33 halaman)

Halaman Cetak

CLOSED CAPTION

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed

Captioned television programs. When available, Closed Captioning

will display text on the screen for hearing impaired viewers or it will

translate and display text in another language.

TO VIEW CLOSED CAPTIONS

Press CAP/TEXT on the remote control to switch between normal TV

and the two Closed Caption Modes (Captions and 1/2 of Full Screen

Text).

Captions: This Closed Caption Mode will display text on the screen in

English or another language (depending on the setting of Closed

Captions 1/2.) Generally, Closed Captions in English are transmitted

on Captions Channel 1 and Closed Captions in other languages are

transmitted on Captions Channel 2.

The Captions will appear in places on the screen where they will least

interfere with the picture, usually on the bottom of the screen. News

programs will usually show three-line Closed Captions which scroll

onto the screen. Most other shows provide two or three lined Captions

placed near the character who is speaking so the viewer can follow

the dialogue. Words in italics or underlined describe titles, words in

foreign languages or words requiring emphasis. Words that are sung

usually appear enclosed by musical notes.

Text: When available, the Text mode will fi!l pad of the screen with a

programming schedule or other information. After selecting a Closed

Caption Mode, it will stay in effect until it is changed, even if the

channel is changed. If the Captions signal is lost due to a commercial

or a break in the signal, the Captions will reappear when the signal is

received again. If the channels are changed, the Captions will be

delayed approximately 10 seconds.

For television programs broadcasting with Closed Captions, look in

your TV guide for the Closed Captions symbol (CC).

• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen.

• Closed Captioned text is only displayed in locations where it is available.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed Captioning, especially with

live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed Captions.

• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange characters or

misspelled words. In thiscase, adjust the antenna for better reception or use an outdoor antenna.

SETTING THE V-CHIP

The V-Chip function

is available only for the U. S. V-Chip system. The Canadian

V-Chip system is not supported.

This TV is fitted with a V-CHIP controller that provides you with channel viewing access controls and restrictions. This function is to

prevent your children from watching violent or sexual scenes that you may choose to exclude.

]

Press MENU and then SET + or-

until the indicator next

to "V-CHIP SET" begins to flash, then press ENTER.

]

Enter your password (4 digits) using the Direct channel

selection buttons (0-9).

In the event of entering an incorrect password press

RESET. Then press ENTER.

]

Enter the

and then

ENTER.

password again,

press

]

Press SET

until the indicator next to "V-CHIP"

begins to flash.

Press ENTER to select ON.

]

Press SET + or - until the indicator next to "TV RATING" or

"MPAA RATING" begins to flash. Press ENTER.

]

Press SET + or-

to select the desired rating for the

applicable video or TV channel. Press ENTER.

]

Press MENU repeatedly until the MENU screen is cleared.

NOTES:

TV RATING

SET-

SET +

OFF <--> TV-Y <--->TV-Y7 <--> TV-G <--> TV-PG <--> TV-14 <-->TV-MA

TV-Y: All children

TV-PG: ParentaIguidance

TV-Y7:7 years old and above

TV-14:14 years old and above

TV-G: Children's program

TV-MA: 17 years old and above

When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to

explain the rating.

Press SET + or - to select the desiredrating you want. Press ENTER to

select the setting ON or OFF.

MPAA

RATING

SET -

SET +

OFF <--> G <--> PG <--> PC-13 <--> R <--> NC-17 <--> X

G: All ages

PC: ParentaI guidance

PC-13:

Parental guidance

less

than 13 years old

R: Under 17 years old parental

guidance suggested

NC-17:17

years old and above

X: Adult only

• V-Chip

function

is based on specifications

for the United States and therefore

may not work properly

in Canada.

• If you want to change your password,

follow steps 1 and 2 and select "CHANGE

PASSWORD"

option. Then enter your new

password.

• The V-Chip function

is activated only on programs

and tapes that have the rating signal.

• Once you block a program

using the V-Chip

function,

the blocked program

cannot be watched

based on the content of the

show. When the program

starts, the "INPUT PASSWORD"

will appear on the screen. When you want to release the V-Chip

temporarily,

enter the password.

If you change the channel

or turn off the TV while the V-Chip

function

was temporarily

released,

the original setting will be

resumed.

If you return to the channel

you were watching

you must re-enter your password

to temporarily

release your V-Chip

function

again.

• When you watch the TV using a cable box or a VCR and the TV is tuned

to channel

3 or 4, you must release the V-Chip

temporarily.

The V-Chip

setting will not be resumed

until you turn offfhe

TV. The TV channel

is not used in this case.

• When changing

the channel with the cable box or the VCR, approximately

10 seconds will pass until the program appears.

• If you forget or lose your password,

you can reset it using the following

procedure:

- While holding down the VOLUME

• button on the TV, press "0" on the remote control for a few seconds.