Toshiba 20AS22 Panduan Pemilik - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk TV Toshiba 20AS22. Toshiba 20AS22 9 halaman. 20as22 user's guide
Juga untuk Toshiba 20AS22: Panduan Servis (33 halaman)

Halaman Cetak

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS:

RISQUE DE CHOC

ELEETRIQUE - NE PAS OUVRIR

WARNING:

TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Important Information

CAUTION

TO PREVENT ELECTRIC SHOCK, DO

NOT USE THIS POLARIZED PLUG

WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLET

UNLESS THE PRONGS CAN BE FULLY

INSERTED INTO THE OUTLET TO

PREVENT ANY EXPOSURE OF THE

PRONGS ON THE POLARIZED PLUG.

ATTENTION

POUR PRÉVENIR LES CHOCS

ÉLECTRIQUES NE PAS UTILISER

CETTE FICHE POLARISÉE AVEC UN

PROLONGATEUR, UNE PRISE DE

COURANT OU UNE AUTRE SORTIE

DE COURANT, SAUF SI LES LAMES

PEUVENT ÊTRE INSÉRÉS À FOND

SANS EN LAISSER AUCUNE PARTIE À

DÉCOUVERT.

REMOTE CONTROL

Before using the remote control transmitter, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two "AAA" (penlight size)

batteries.

3. Replace the battery compartment

cover.

3L21001A E

The lightning symbol in the triangle tells you

that the voltage inside this product may be

strong enough to cause an electric shock.

DO NOT TRY TO SERVICE THIS

PRODUCT YOURSELF.

The exclamation mark in the triangle tells you

that important operating and maintenance

instructions follow this symbol.

CAUTION

The plug has one prong wider than the

other and will fit only one way into a

standard electrical

wide prong

outlet (120 volt

AC, 60 Hz). If the

plug does not fit

into the outlet, try

turning it around.

If the plug still does not fit, the outlet is

probably non-standard and must be

replaced by a qualified electrician. Do not

tamper with the plug or try to force it into

a non-standard outlet.

Note to CATV system installers in the

USA

This reminder is provided to call the

CATV system installer's attention to

Article 820-40 of the NEC, which

provides guidelines for proper grounding,

and, in particular, specifies that the cable

ground shall be connected to the

grounding system of the building, as

close to the point of cable entry as

practical.

Use two "AAA" size penlight batteries

(supplied) for the transmitter. The batteries

may last approximately one year depending

on how much the remote control is used. For

best performance, it is recommended that

batteries should be replaced on a yearly

basis, or when the remote operation

becomes erratic. Do not mix old and new

batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when

using batteries in this device:

1. Use only the size and type of batteries

specified.

2. Be sure to follow the correct polarity when

installing the batteries as indicated in the

battery compartment. Reversed batteries

may cause damage to the device.

3. Do not mix different types of batteries

together (e.g. Alkaline and Carbon-zinc)

or old batteries with fresh ones.

4. If the device is not to be used for a long

period of time, remove the batteries to

prevent damage or injury from possible

battery eakage.

5. Do not try to recharge batteries not intended

to be recharged; they can overheat and

rupture. (Follow battery manufacturer's

directions.)

Precautions

Installing your TV

• Place the TV on the floor or on a

sturdy platform. The mounting surface

should be flat and steady. If you install

the TV on a soft floor, make sure that

the floor is not damaged by the weight

of the TV.

• Place the TV far enough away from the

walls to allow proper ventilation. This

will prevent the TV from overheating

and avoid possible damage to the TV.

Avoid dusty areas too.

Using your TV

• Do not stand or climb on the TV.

• Do not put any heavy object on top of

the TV.

• Do not place containers with liquids

such as drinks, aquariums, or lighted

candles on the TV. If any foreign

material or water leaks into the TV,

unplug the power cord and contact

your dealer.

• Avoid displaying stationary images on

your TV screen for extended periods

of time. Stationary patterns (such as

those generated by computer displays,

video games, or stock market reports)

can become permanently engrained

on the picture tube. This damage is

not protected by your warranty

because it is the result of misuse. If

you wish to use your TV to display still

images, reduce brightness and

contrast settings. Never leave a

computer or video game display

unattended.

POWER

CH RTN

RECALL

SLEEP

MUTE

CH +

VOL

–

ENTER

CH –

–

SET

RESET

TV/VIDEO

CAP/TEXT

1/2

1. POWER Button - Press to turn the TV on.

Press again to turn the TV off.

2. Direct Channel Selection Buttons (0-9) -

Allows direct access to any channel.

3. CH RTN Button - This button allows you to go

back to the previous channel selected by just

pressing the CH RTN button. Press this button

again to return to the channel you were

watching.

4. SLEEP Button - To set the TV to turn off after

a preset amount of time, press the SLEEP

button on the remote control. The clock will

count down 10 minutes each time the button is

pressed in the order of 120, 110, 100, ······ 20,

10, 0. After the sleep time is programmed, the

display will disappear then reappear momentarily

04/04/2002, 10:52

Cleaning your TV

• To clean the TV screen:

1. Unplug the TV from the power outlet

to avoid possible shock hazard.

2. Use a clean, dry cellulose sponge or

chamois cloth to clean TV screen

and trim. Do not use liquid or aerosol

cleaning agents. Liquid spilling into

the TV cabinet may cause electric

shock or damage the TV.

CAUTION

Never use strong solvents such as

thinner, benzene, or other chemicals on

or near the cabinet, as they can damage

the finish of the cabinet.

every ten minutes to remind you the sleep

timer function is operating. To confirm the

sleep time setting, press the SLEEP button

once and the remain ing time will be momentarily

displayed. To can cel sleep time, press

the SLEEP button repeat edly until the display

turns to 0.

5. VOL (VOLUME) + / – Buttons - Press the +

button to increase, or the – button to decrease

the volume level.

6. MENU Button - Press to display the On-

Screen menu function.

7. SET + / – Buttons - Press to select the desired

setting during On-Screen operations.

8. RESET Button - Press to reset the On-Screen

picture adjustments to their factory preset

positions.

9. TV/VIDEO Button - Switches between TV and

external inputs.

10. RECALL Button - When you press this button,

the channel number will appear in the upper

right corner of the screen. Press the button

again to remove display from the screen.

11. MUTE Button - To turn off the sound, press

this button once. The TV will be silenced and

the symbol MUTE will appear on the screen.

The muting feature can be released by

pressing the MUTE button again or one of the

VOL + or – buttons.

12. CH (CHANNEL) + / – Buttons - Press the +

button to change to a higher numbered

channel set into memory. Press the – button to

change to a lower numbered channel set into

memory.

13. ENTER Button - Press to enter or select

information for On-Screen operations.

14. CAP/TEXT Button - Press this button to

switch between normal TV and the two Closed

Caption modes (captions and 1/2 of full screen

text). Closed Captioning will display text on

screen for hearing impaired viewers.

15. 1/2 Button - Switches between Channel 1 and

Channel 2 in the Closed Caption mode.