Philips AZ787 Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips AZ787. Philips AZ787 17 halaman. Cd soundmachine
Juga untuk Philips AZ787: Spesifikasi (3 halaman)
Halaman Cetak
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the exhausted battery:
1
Open the battery tray.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery tray.
Connect power
The unit can be powered by either AC power
or batteries.
7
EN
Option 1: AC power
Warning
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
•
Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Connect the AC power cord to:
the AC~ MAINS socket on the unit.
•
•
the wall socket.
Tip
•
To save energy, turn the unit off after use.
Option 2: Battery power
Caution
•
Batteries contain chemical substances, so they should
be disposed of properly.
Note
•
Batteries are not supplied with the accessories.
1
Open the battery compartment.
2
Insert 6 batteries (type: R-20, UM-1 or
D-cells) with correct polarity (+/-) as
indicated.