ARIONA POOLS OCEAN INDUSTRIAL OC1600.50 Instruksi dan Manual Perawatan - Halaman 6
Jelajahi secara online atau unduh pdf Instruksi dan Manual Perawatan untuk Filter Kolam Renang ARIONA POOLS OCEAN INDUSTRIAL OC1600.50. ARIONA POOLS OCEAN INDUSTRIAL OC1600.50 12 halaman.
Halaman Cetak1. HANDLING
1.1. PACKAGING
The filters are delivered on wooden pallets suited to the size of the filter, and in a
vertical position as standard. They are wrapped in a protective film.
1.2. STORAGE
If a filter is not going to be installed immediately, it must be kept in its original
packaging and stored under cover, protected from the sun and inclement weather.
1.3. HOW TO MOVE THEM
Use a forklift truck or crane to load, unload and move the filters.
•
Use the lifting eyebolts of the filters to lift and transport them to the desired
•
location. Use a cable or sling appropriate to the weight of the filter. The filter must
always be empty of sand and water when being moved or handled.
Never roll the filter to move it.
•
When moving the filter, never hold it by the inlet or outlet connections, the
•
top hole or sight glasses.
Never attach a hook to the inside of the filter to lift or pull it.
•
The filters are made to resist internal pressure, but they are very vulnerable to
•
side-on impact. Avoid knocking the filters.
When placing the filter in its final location, ensure that the surface of the ground
•
is perfectly flat and clean. It is therefore necessary to leave enough space around
the filter to allow for inspection and maintenance operations to be carried out.
2. INSTALLATION
2.1. ENGINE ROOM
The engine room must have a large enough surface area to allow for installation
according to the size of the filters, and to facilitate installation and handling of the
valve manifolds, as well as proper maintenance.
There must be a drainage system to prevent flooding in the case of accidental
water leakage from the pipes, filters and pumps, as well as good ventilation.
6