Xerox 4595 Dokumen Harapan Pelanggan - Halaman 19

Jelajahi secara online atau unduh pdf Dokumen Harapan Pelanggan untuk Printer Xerox 4595. Xerox 4595 33 halaman. Copier/ printer with copy-server and controller
Juga untuk Xerox 4595: Panduan Untuk Operator (1 halaman), Memperkenalkan (4 halaman), Panduan Referensi Cepat (6 halaman), Panduan Referensi Cepat (4 halaman), Brosur & Spesifikasi (4 halaman)

Space requirements

The following illustration shows the space requirements and service space envelope with the

optional Finisher/Folder and HCF installed. For other configurations, consult the Module

Dimensions chart.

The illustration below shows the space requirements and service space envelope for the printer

system with the Finisher/Folder and HCF installed. If there is no HCF attached, then the Multi-

Sheet Inserter, in the closed position (3.3 in/83 mm), needs to be figured in.

The optional FreeFlow DocuSP Print Server Stand is not shown.

NOTE 1: The dimensions shown are absolute minimums.

NOTE 2: There should be a 78 in. (1981 mm) minimum height clearance in service envelope.

NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery

personnel.

NOTE 4: If there is no HCF attached, then the Multi-Sheet Inserter, in the closed position (3.3"/83

mm), must be calculated in the space requirements.

The following illustration shows the space requirements and service space envelope with the

optional Finisher/Folder, optional FreeFlow Print Server, and optional HCF installed. For other

configurations, consult the Module Dimensions chart.

NOTE 1: The dimensions shown are absolute minimums.

NOTE 2: 78" (1981 mm) minimum height clearance in service envelope.

NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery

personnel. (See diagram above)

NOTE 4: If there is no HCF or OHCF attached, then the Multi-Sheet Inserter, in the closed

position (3.3"/83 mm), must be calculated in the space requirements.