Xerox WorkCentre M118 Petunjuk Produksi Ulang - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Produksi Ulang untuk Printer Xerox WorkCentre M118. Xerox WorkCentre M118 14 halaman. Drum cartridge remanufacturing
Juga untuk Xerox WorkCentre M118: Panduan Pengguna (2 halaman), Manual Modul (2 halaman), Kartu Instalasi Cepat (2 halaman), Manual Perangkat Lunak (47 halaman), Panduan Pengaturan Cepat (5 halaman), Panduan Pengaturan Cepat (5 halaman), Manual (28 halaman), Manual Pemasangan Dudukan (4 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (1 halaman), Panduan Instalasi (1 halaman), Panduan Memulai (25 halaman), Panduan Evaluator (12 halaman), Panduan Servis (12 halaman)

Halaman Cetak
Xerox WorkCentre M118 Petunjuk Produksi Ulang
12. Install the new wiper blade and two screws.
14. Place the drum in the hopper and carefully place aside.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
13. Clean the PCR with your normal cleaner. Wipe off the old
conductive grease from the shaft and replace. Re-install the
PCR in the assembly grease side to the black PCR holder.
15. On the developer roller side, remove the two springs from
the metal slide cover.
www.uninetimaging.com