Xerox Fiery X12 Menggunakan Manual - Halaman 9
Jelajahi secara online atau unduh pdf Menggunakan Manual untuk Aksesori Printer Xerox Fiery X12. Xerox Fiery X12 12 halaman. Controller interface kit
Procedures
T
BIOS
O REPLACE THE
The BIOS chip is located in socket U8 on the motherboard. The BIOS chip contains
boot information, such as the startup diagnostics that the Fiery X12/Fiery X40 uses when
you power on the system.
1. Locate the BIOS chip on the motherboard (socket U8).
2. Using a PROM extractor, remove the BIOS chip from its socket on the motherboard.
3. Insert the BIOS chip provided in this kit into the socket so that the notch in the chip is
aligned with the notch in the socket.
The BIOS chip is shipped in a socket mount that helps prevent pins from bending when
installing the BIOS chip into the socket on the motherboard. If you notice any bent pins,
straighten them gently with a pair of needlenose pliers. An extra socket mount is also
provided in this kit in case any pins break during installation.
Socket notch
Pin 1
4. Reassemble the Fiery X12/Fiery X40 and complete installation (see page 6).
CHIP
BIOS chip
5