Yamaha Arius YDP-184 Panduan Pembaruan Firmware - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pembaruan Firmware untuk Alat Musik Yamaha Arius YDP-184. Yamaha Arius YDP-184 5 halaman.



Updating the Firmware

Notice: The following must be observed during the firmware update



Do not turn off the instrument during the update.



Do not remove the USB flash drive from the instrument.

When you run into a trouble during the firmware update, refer to the

section located at the end of this document.

1. Make sure that the instrument is turned off before updating the firmware.

2. Insert the USB flash drive with the copied firmware into the USB [TO DEVICE] terminal.

3. Press and hold the [▶/ll] (PLAY/PAUSE) button, and turn on the instrument.

Keep the [▶/ll] button held down until the display shows the following message.

The red marking below shows where the [▶/ll] button is located on the panel.

4. Press the [▶/ll] button again when the display shows the following message.

Troubleshooting