Yamaha DTX520K Panduan Pemilik - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha DTX520K. Yamaha DTX520K 48 halaman. Dtx drums
Juga untuk Yamaha DTX520K: Panduan Perakitan (2 halaman), Panduan Perakitan (2 halaman)

Halaman Cetak

26-3. If you want to change the Drum Kit name, press the

[

]/[

] buttons to move the ﬂashing cursor to the

character you want to edit, then rotate the jog dial to

select a character. A Drum Kit name can contain a

maximum of 12 characters, and these can be selected

from the following list.

space

!"#$%&'()*+,-./0123456789:;<=>?@

ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`

abcdefghijklmnopqrstuvwxyz{|}≥≤

26-4. Press the [SAVE/ENTER] button again. A prompt

appears asking you to conﬁrm the Store operation.

KIT~save~to~51

~Are~you~sure~?

26-5. Press the [SAVE/ENTER] button once more to actu-

ally execute the Store operation.

*To cancel the Store operation, press any button except

for the [SAVE/ENTER] and [SHIFT] buttons. (When

"Are you sure?" appears in the display, the jog dial will

also cancel the operation.)

When the Store operation is complete, the following

display appears.

~~~Completed!

With this operation, you have now created a

Drum Kit that has an original bass Drum

Voice.

Use the same procedure to create Drum

Voices for the other pads (input sources) and

create a complete custom Drum Kit of your

own.

7 Create Your Own Original Drum Kit

Factory Set

This operation returns all of the DTX500's internal set-

tings back to their original factory defaults.

Please proceed with caution, since executing

this operation will also rewrite the entire mem-

ory contents of the DTX500 (all Click Sets, User

Trigger Setups 8–11, User Drum Kits 51–70, User

Songs 64–83, Utility data) with the data that was

set in the unit's memory when it was shipped

from the factory.

Operation

1. First, press the [SHIFT] + [SAVE/ENTER] buttons to

call up the Utility pages.

UTIL1~Hi-hat

HHofs=~~0~T=~~5‚

2. Press the [>] button several times to call up the

UTIL8 page.

UTIL8

"~Factory~Set

3. From the page shown above, press the [SAVE/

ENTER] button to call up the prompt shown below,

asking for conﬁrmation of the Factory Set operation.

* To cancel the Factory Set operation, press any button

except for the [SAVE/ENTER] and [SHIFT] buttons (the

jog dial can also be used to cancel the operation).

All~data~will~be

lost.AreYouSure?

4. Once again, press the [SAVE/ENTER] button to pro-

ceed with the operation.

~All~Memory

~Initializing...

DTX500 Owner's Manual