Yamaha AX-870 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Yamaha AX-870. Yamaha AX-870 16 halaman. Natural sound stereo integrated amplifier

Halaman Cetak

Using the PURE DIRECT switch

You can enjoy the purest possible sound from your audio

sources by setting this switch so that the indicator illuminates.

By doing so, the audio signal bypasses the BASS, TREBLE,

BALANCE and LOUDNESS controls, the SUBSONIC FILTER

switch and the PRE OUT/MAIN IN terminals, eliminating any

alterations to the audio signal.

Setting the SUBSONIC FILTER switch

If you set this switch to "ON" position, undesirable ultra-low-

frequency signals caused by turntable rumble or warped

records can be cut out without losing sound quality.

SUBSONIC

FILTER

When you listen with headphones

Connect the headphones to the PHONES jack. When listening

with headphones privately, set both the SPEAKERS A and B

switches to the OFF position.

PURE

DIRECT

OFF

PHONES

Setting the PHONO switch

Select either MM or MC position depending on your PHONO

cartridge, Moving Magnet or Moving Coil type. However, if you

use a high output MC cartridge, select MM position.

Setting the MODE switch

For AX-1070 only

This switch can be used for switching between stereo and

monaural operation. Normally this switch should be set to the

STEREO position.

MODE

PHONO

MONO

STEREO