Yamaha DHR Series Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Yamaha DHR Series. Yamaha DHR Series 24 halaman. Powered speaker system

Setup Examples

Rotatable Horn (DHR10 only)

Using a No. 2 Phillips head screwdriver, remove all fixing screws on the grille, and remove the grille from the speaker.

Using a No. 2 Phillips head screwdriver, remove all screws installed on the horn and pull the horn out from the speaker.

NOTE

Make sure not to push the screws too strongly with the Phillips head screwdriver. This may cause the nuts inside the cabinet to fall off.

Screws (four total)

Rotate the horn 90 degrees, and re-install the horn to the speaker, reversing the steps above.

Vertical

Rotate 90°

Horizontal