Zanussi ZSF2430 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZSF2430. Zanussi ZSF2430 16 halaman.
Juga untuk Zanussi ZSF2430: Panduan Pengguna (32 halaman)
Halaman Cetak
4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Adjusting the water softener
German
degrees
(°dH)
> 24
22 - 24
20 - 22
18 - 20
16 - 18
13 - 16
10 - 13
7 - 10
4 - 7
< 4
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
The water softener is set at the factory at
level 5.
1. Press and hold the start/cancel button.
Turn the programme knob clockwise until
the programme marker agrees with the first
washing programme on the control panel.
2. Release the start/cancel button when the
on/off indicator light and the start/cancel in-
dicator light start to flash.
– At the same time, the end indicator light
flashes to show the level of the water
softener.
Example:
5 flashes, pause, 5 flashes, pause, etc...
= level 5
3. Press the start/cancel button one time to
increase the water softener level by one
step.
The end indicator light shows the new level.
4. Turn the programme knob to the off posi-
tion to save the operation.
www.zanussi.com
Water hardness
French
degrees
(°fH)
> 40
39 - 40
35 - 39
32 - 35
28 - 32
23 - 28
18 - 23
12 - 18
7 - 12
< 7
Filing the salt container
Do not use detergent and do not load the
baskets.
mmol/l
degrees
> 4.2
3.9 - 4.2
3.5 - 3.9
3.2 - 3.5
2.8 - 3.2
2.3 - 2.8
1.8 - 2.3
1.2 - 1.8
0.7 - 1.2
< 0.7
1
Electronic
Clarke
adjust-
ment
> 29
10
27 - 29
9
25 - 27
8
23 - 25
7
20 - 23
6
17 - 20
1)
5
13 - 17
4
9 - 13
3
5 - 9
2
< 5
2)
1
2
5