Zanussi ZSF2450 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZSF2450. Zanussi ZSF2450 20 halaman. Product manaul
Juga untuk Zanussi ZSF2450: Panduan Pengguna (20 halaman), Panduan Pengguna (20 halaman)

Halaman Cetak

Put the filters back.

Turn the microfilter

clockwise to lock it.

Cleaning the spray arm

Regularly examine the spray arm. Remove re-

maining food from the holes in the spray arm.

Do these steps to remove and to put the spray

arm back:

Remove the filters A

and B from the bottom

of the appliance.

Fully clean the filters

below running water.

External cleaning

Clean the external surfaces of the appliance and

control panel with a damp soft cloth. Only use

neutral detergents. Do not use abrasive products,

scouring pads or solvents (acetone, trichloro-

ethylene etc...).

Frost precautions

Caution! Do not install the appliance where

the temperature is below 0 °C. The

manufacturer is not responsible for damage

because of frost.

If not possible, empty the appliance and close the

door. Disconnect the water inlet hose and re-

move water from the water inlet hose.

Long periods of non-operation

Do these steps when you do not use the appli-

ance for a long period:

1. Disconnect the mains plug from the mains

socket.

2. Close the water tap.

3. Keep the door open to prevent unpleasant

smells.

4. Keep the inner side of the appliance clean

(filters especially).