Zanussi ZCG 7690 Panduan Pengguna - Halaman 42

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZCG 7690. Zanussi ZCG 7690 44 halaman. Zanussi user manual gas cooktop zcg7680, zcg7690
Juga untuk Zanussi ZCG 7690: Panduan Pengguna (44 halaman)

Halaman Cetak

Checking the main oven

Turn on the oven thermostat control

knob to mark 9. As soon as the burner

is alight the button can be released.

There should now be a low gas rate to

the burner, which is the F.S.D bypass

rate.

When the F.S.D. phial has heated up it

opens the F.S.D valve which allows the

main gas supply to the oven burner.

After 1 minute check that the flame

covers the full width of the burner and is

stable.

Set the oven control to Mk 2, close the

oven door and check that after about 10

minutes the flame size has reduced.

Turn off the control and check that the

oven flames go out.

General note

Instruct the user on how to use the appliance

and its ignition system. Refer the user to the

wording on the inside cover which gives

advice on the safe operation of the

appliance.