Lenovo SE350 Panduan Konfigurasi & Instalasi
Jelajahi secara online atau unduh pdf Panduan Konfigurasi & Instalasi untuk Server Lenovo SE350. Lenovo SE350 24 halaman. Toolless friction rail v2
Juga untuk Lenovo SE350: Mulai Cepat (2 halaman), Manual (12 halaman), Manual (8 halaman)
Halaman Cetak
Configuration Installation Guide
Bookshelf Configuration
This document provides important information for installing and removing the bookshelf configuration.
Install the bookshelf configuration
To install the bookshelf configuration, complete the following steps.
Note: Reserve 500 mm empty space in front of the node so that you can have sufficient space to install and remove the node.
1.
If you would like to stack your nodes, complete the following steps.
Hook the six T-pins into place and slide the node sleeve backward.
Fasten the thumbscrew.
Repeat step
and step
Note: Bookshelf supports up to three node stacks.
2.
Align the right bookshelf with the node sleeve and slightly push the bookshelf leftward to hook the six T-pins into place; then,
fasten the two screws.
to stack your node sleeves.
1