3D Hobby Shop 59" AJ Slick Panduan Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pesawat terbang 3D Hobby Shop 59" AJ Slick. 3D Hobby Shop 59" AJ Slick 20 halaman.

Install elevator pushrod onto horn as shown. Tighten the ball-link to the elevator horn using a 2mm

screw, washer, and nut. Once the 2mm screw and nut are tight, use medium or thick CA glue to lock the

nut in place so it cannot rotate. Make sure the 2mm screw and nut cannot come loose in flight.

The rudder pull-pull cables are assembled as shown in the above diagram.