Abbriata Miniroto M50 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Pertanian Abbriata Miniroto M50. Abbriata Miniroto M50 19 halaman.

Abbriata M50 Quick Start Guide

Figure 2 center draw type are attached to the pallet with the draw bar folded up for shipping

The tools needed for this operation are as follows:

1. 24 mm socket (15/16 will substitute)

2. 22 mm wrenches, or adjustable (7/8 will substitute)

3. 19 mm wrench or socket (3/4 will substitute)

4. Crowbar or wrecking bar for removing nailed down wood

Do not cut the steel strapping around the wheels until directed to do so. The strapping will hold the unit in place

for your safety.

Figure 3 leave the steel strapping in place

Using a 24 mm socket (15/16 sub.) loosen the bolt holding the angle adjustment in place on both sides. Do not

remove the bolt.

Page | 4